bending test
英 [ˈbendɪŋ test]
美 [ˈbendɪŋ test]
弯曲试验；反复弯曲试验；弯曲测试；抗弯试验
双语例句
- The theory and method of bending test on nanobeam for the measurement of Young ′ s modulus based on atomic force microscope ( AFM) are introduced.
阐述了基于原子力显微镜（AFM）的弯曲测试测量纳米梁杨氏模量的理论和方法。 - Discussion on contact situation of specimen with supports in Hopkinson bar three-point bending test
Hopkinson杆三点弯曲试验中试样与支座接触状态分析 - Some Thinking on Improving Bending Test Accuracy of Metal Plank Material
提高金属板材弯曲试验准确性几点思考 - Identification of each furnace or each lot of reinforcing steel bars ( including tensile test, bending test results);
每炉或每批钢筋的鉴定（包括拉力试验，弯曲试验结果）； - Physical bending test for evaluating flexibility of a coating.
评估涂料柔韧性的物理弯曲试验。 - A special machine with scanning electron microscope ( SEM) used was designed for three point bending test.
设计了一种可用扫描电镜（SEM）动态观察、专门用于三点弯曲试验的特殊装置。 - Bending test of biomimetic self-repair concrete pole
仿生自修复混凝土梁的弯曲试验研究 - Discussion on Classification and Assessment of the Steel Plate Specimens after Tensile or Cold Bending Test
钢板拉伸与冷弯试验后试样分类及评定的探讨 - Bending test and crack calculation of bi-steel concrete beam
双钢筋混凝土梁的受弯试验及裂缝计算 - Three-point bending test was carried out for the measurement of the femur biomechanical properties.
取股骨行三点弯曲试验，测骨生物力学性能指标。 - The calculation is checked by a pure bending test.
文中由纯弯曲试验，验证了阶梯形孔法及附加应力系数计算的可靠性。 - Using the strain test system, we examined the biomechanics index according the tension and three-spot bending test;
使用应变测试系统，按股骨拉伸和三点弯曲试验，测定股骨生物力学指标；以等离子体发射光谱法测定腰椎骨骨钙含量； - By using Bending test, Bending Creep Test and low-temperature splitting test, the low-temperature crack resistance is tested.
采用弯曲试验、弯曲蠕变试验和低温劈裂试验进行了低温抗裂性检测； - The process of three-point bending test and data processing are involved.
介绍了岩石三点弯曲蠕变试验过程及数据处理方法。 - In this paper, the distribution of biaxial bending strength and the influence of loading rate on fatigue strength in the biaxial bending test by use of soda-lime glass specimen with micro indentation crack are studied.
本文研究了带有微小压痕裂纹的钠钙玻璃试件在惰性环境中的双轴向弯曲强度分布和加载应力速率对试件疲劳强度的影响。 - The technique of acoustic emission has been employed in the SENB bending test for the thermal damaged materials.
在热震损伤材料的SENB抗弯试验中采用了声发射技术。一般说来，热震损伤程度越严重则声发射总计数越多。 - In later technique analyzing and testing, soften and compress mechanism and condition, minimum bending radius, multi-direction bending test with fixing and strength examination have been done.
在实验过程和后期的技术分析中，对木材软化机理和技术条件、顺纹压缩机理和技术条件、木材最小弯曲曲率半径和多向弯曲实验、弯曲定型以及强度检测等方面进行了探索和分析。 - The biomechanical properties of the healing radius were analyzed by a three point bending test.
桡骨的生物力学性能由三点弯曲实验所得的结果进行分析； - The analysis of a four-point bending test of box girder specimens shows favourable agreement with experimental data.
对箱形桁材的四点弯曲试验的分析表明与试验数据吻合良好。 - The adhesion of the coating was tested by fatigue bending test and scratch test.
通过疲劳弯曲实验和划痕实验测试了镀层与基体之间的结合力； - The failure loads were tested in three-point bending test.
用3点弯曲法测试两组试件钛瓷分离时的载荷。 - The bonding strength of the samples was measured by a three-point bending test.
采用三点弯曲试验测量钛与瓷的结合强度。 - The three bending test can be applied for evaluating the mix fatigue performance under the impact loading.
在冲击荷载作用下小梁三点弯曲试验可以作为评价混合料疲劳性能的试验方法。 - And simulated three-point bending test of concrete, given the failure process of the specimens map and the load-displacement curve.
模拟了混凝土的三点弯曲试验，给出试件的破坏过程和荷载&位移曲线。 - Three steel-concrete joint models with different structural forms were designed and made. The FEM analysis, bending test, shear test, compression test, simulating actual bridge test and failure test were done.
设计制作了3种不同结构形式的钢-混凝土接头，完成了纯弯试验、纯剪试验、纯压试验、模拟实桥试验和破坏试验，并进行了空间有限元分析。 - Crack propagation of three-point bending test imitated and get the result coincide with the actual.
详细介绍了XFEM理论，并模拟了陶瓷试件三点弯曲试验中裂纹的扩展，得到与实相吻合的结果。 - The performance of the model material is studied by the bending test of the model single pile.
研制了满足相似关系的模型混凝土和模型钢筋，通过模型单桩的抗弯试验，研究了模型材料的工作性能。 - And their cured and carbon fiber laminate under tensile and bending test, but also tested the best carbon fiber laminates heat resistance.
并对它们的固化物和碳纤维层合板进行了拉伸和弯曲测试，而且还测试了最好的碳纤维层合板的耐热性能。